Ip testing laboratory
Contents
- ITC can perform Electrical Safety testing against IP Testing for following kinds of products/standards:
- IP(Ingress Protection) Testing
- Protection from the tests specified by : the next standard :-
- This classification system make use of the “IP” (“Ingress Protection”) normally adopted by two digits:
- Purpose:
- Protection against solid/dust entry:
- 1. IP1X
- 2. IP2X
- 3. IP3X
- 4. IP4X
- Shielded from solid objects exceeding than 1. mm diameter
- Specs:ITC can perform Electrical Safety testing against IP Testing for following kinds of products/standards:
- IP(Ingress Protection) Testing
- Protection from the tests specified by : the next standard :-
- This classification system make use of the “IP” (“Ingress Protection”) normally adopted by two digits:
- Purpose:
- Protection against solid/dust entry:
- 1. IP1X
- 2. IP2X
- 3. IP3X
- 4. IP4X
- 5. IP5X
- 6. IP5X
- Protection Index Against Water entry:
- 1. IPX1
- 2. IPX2
- 3. IPX3
- 4. IPX4
- 5. IPX5
- 6. IPX6
- 7. IPX7
- 8. IPX8
ITC can perform Electrical Safety testing against IP Testing for following kinds of products/standards:
We’ve created a special testing facility against Solid particle protection & Liquid ingress protection generally known as because the IP testing. We’ve below test facility at the moment within our
1. IP 1X, IP 2X, IP 3X, IP 4X for defense of machine against Transmission by solid foreign objects
2. IP 5X for Dust Protection
3. IP 6X for Dust Protection
4. IP X3, IP X4, IP X5, IP X6, IP X7 & IP X8 for defense against ingress water.
| Summary Of Generally Searched for IP CODES | |||
| 1X | protection against objects >50mm | X1 | protection against vertically Dripping water |
| 2X | protection against objects >12.5mm | X2 | dripping water at +-15° from vertical |
| 3X | protection against objects >2.5mm | X3 | protection against spraying water |
| 4X | protection against objects >1mm | X4 | protection aginst splashing water |
| 5X | Dust Protected ( limited ingress) | X5 | protection aginst low pressure jetting water |
| 6X | Dust tight protection | X6 | protection against ruthless jetting water |
IP(Ingress Protection) Testing
Ingress protection (IP) testing at ITC India NABL accredited Electrical Safety Testing laboratory can determine a products inclination towards solid particle (including dust) ingress and liquid ingress (water).
Protection from the tests specified by : the next standard :-
1. IEC 60529
2. BS EN 60529
The conventional we most generally use at ITC for ingress protection is BS EN 60529 and IEC 60529. In this particular standard it outlines an worldwide classification system to check the sealing effectiveness of enclosures of electrical equipment from the the gear of solid particles and liquid.
This classification system make use of the “IP” (“Ingress Protection”) normally adopted by two digits:
1. Ingress Protection of (IP) Ratings (Solid ingress)
2. Ingress Protection (IP) Ratings (Liquid ingress)
Purpose:
The testing will connect to the protection from the equipment against ingress of solid physiques and/or fluids, different over differing levels of protection, based upon the needs you set in your product.
Protection against solid/dust entry:
The exam specified by the very first digit from the Protection Index (IP1X, IP2X, IP3X, IP4X, IP5X, IP6X), meaning protection against solid particles and dirt entry in to the fixture based on the BS EN 60598-1 IEC 60598 – 1, IEC 60529.
1. IP1X
Protection against solid object more than 50mm diameter
Specs:
The exam for IP1X enclosures involves pressing a 50 mm diameter sphere having a pressure of fifty N from the opening from the enclosure. The merchandise qualifies when the sphere doesn’t fully go into the enclosure and when there’s a acceptable distance from harmful live parts and moving parts.
2. IP2X
Protection against solid objects diameter exceeding than 12.5 mm
Specs:
IP 2X testing involves pressing a standardized 12 mm diameter test finger having a pressure of the 10 N, having a 12,5 mm sphere having a pressure of 30 N, against all openings from the enclosure. For acceptance, the sphere fishing rod not fully go into the enclosure and there has to be a acceptable distance between your test finger and harmful live parts and moving parts
3. IP3X
Shielded from solid objects exceeding than 2.5 mm diameter
Specs:
IP 3X testing involves pressing a standardized test probe, by means of a couple,5 mm steel wire having a against all openings from the enclosure, using the pressure of three N. For acceptance the probe mustn’t enter the enclosure.
4. IP4X
Shielded from solid objects exceeding than 1. mm diameter
Specs:
ITC can perform Electrical Safety testing against IP Testing for following kinds of products/standards:We’ve created a special testing facility against Solid particle protection & Liquid ingress protection generally known as because the IP testing. We’ve below test facility at the moment within our
1. IP 1X, IP 2X, IP 3X, IP 4X for defense of machine against Transmission by solid foreign objects
2. IP 5X for Dust Protection
3. IP 6X for Dust Protection
4. IP X3, IP X4, IP X5, IP X6, IP X7 & IP X8 for defense against ingress water.
| Summary Of Generally Searched for IP CODES | |||
| 1X | protection against objects >50mm | X1 | protection against vertically Dripping water |
| 2X | protection against objects >12.5mm | X2 | dripping water at +-15° from vertical |
| 3X | protection against objects >2.5mm | X3 | protection against spraying water |
| 4X | protection against objects >1mm | X4 | protection aginst splashing water |
| 5X | Dust Protected ( limited ingress) | X5 | protection aginst low pressure jetting water |
| 6X | Dust tight protection | X6 | protection against ruthless jetting water |
IP(Ingress Protection) Testing
Ingress protection (IP) testing at ITC India NABL accredited Electrical Safety Testing laboratory can determine a products inclination towards solid particle (including dust) ingress and liquid ingress (water).
Protection from the tests specified by : the next standard :-
1. IEC 60529
2. BS EN 60529
The conventional we most generally use at ITC for ingress protection is BS EN 60529 and IEC 60529. In this particular standard it outlines an worldwide classification system to check the sealing effectiveness of enclosures of electrical equipment from the the gear of solid particles and liquid.
This classification system make use of the “IP” (“Ingress Protection”) normally adopted by two digits:
1. Ingress Protection of (IP) Ratings (Solid ingress)
2. Ingress Protection (IP) Ratings (Liquid ingress)
Purpose:
The testing will connect to the protection from the equipment against ingress of solid physiques and/or fluids, different over differing levels of protection, based upon the needs you set in your product.
Protection against solid/dust entry:
The exam specified by the very first digit from the Protection Index (IP1X, IP2X, IP3X, IP4X, IP5X, IP6X), meaning protection against solid particles and dirt entry in to the fixture based on the BS EN 60598-1 IEC 60598 – 1, IEC 60529.
1. IP1X
Protection against solid object more than 50mm diameter
Specs:
The exam for IP1X enclosures involves pressing a 50 mm diameter sphere having a pressure of fifty N from the opening from the enclosure. The merchandise qualifies when the sphere doesn’t fully go into the enclosure and when there’s a acceptable distance from harmful live parts and moving parts.
2. IP2X
Protection against solid objects diameter exceeding than 12.5 mm
Specs:
IP 2X testing involves pressing a standardized 12 mm diameter test finger having a pressure of the 10 N, having a 12,5 mm sphere having a pressure of 30 N, against all openings from the enclosure. For acceptance, the sphere fishing rod not fully go into the enclosure and there has to be a acceptable distance between your test finger and harmful live parts and moving parts
3. IP3X
Shielded from solid objects exceeding than 2.5 mm diameter
Specs:
IP 3X testing involves pressing a standardized test probe, by means of a couple,5 mm steel wire having a against all openings from the enclosure, using the pressure of three N. For acceptance the probe mustn’t enter the enclosure.
4. IP4X
Shielded from solid objects exceeding than 1. mm diameter
Specs:
IP 4X testing involves pressing a standardized test probe by means of 1 mm steel wire from the all openings from the enclosure having a pressure of the 1N. For acceptance the probe mustn’t type in the enclosure
5. IP5X
Dust Protected
Specs:
Ingress of dust isn’t Totally avoided, however it mustn’t type in sufficient quantity to hinder the acceptable operation from the equipment complete protection against contact (dust proof). This test is carried out using circulated dust which can be type in the product but shouldn’t considerably de-grade the whole process of the gear.
6. IP5X
Dust tight (having a vacuum put on the merchandise)
Specs:
Products to become tested for IP 6 X enclosures are uncovered to fine-grained circulating talcum powder inside a dust chamber for 8 hrs using the exposure moment based on the testing conditions for that specific item. This tests are performed having a maximum pressure of 20 mbar within the item under test, with an optimum abstraction rate of 60 volumes/hour.
Protection Index Against Water entry:
This test specify the 2nd digit from the Protection Index ( IPXI, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8), meaning protection against water entry in to the fixture based on the) BS EN 60598-1 IEC 60598 – 1, IEC 60529.
1. IPX1
Shielded from dripping water
Specs :
The enclosure is uncovered to dripping water having a flow rate of just one mm per min for ten minutes. Acceptance for sophistication IP X1 requires no water to possess permeated in to the item in this quantity, or in this position regarding prevent satisfied operation from the item in order to present a security risk
2. IPX2
Protection against dripping water at tilted to fifteen levels
Specs
The enclosure is uncovered to dripping water during 4 positions for just two.a few minutes, having a flow rate of three mm/min. The enclosure is tested in four fixed positions of 15 degree from normal position Acceptance for that Class IP X2 requires no water to possess permeated in to the item in this quantity or ready regarding avoid the acceptable operation from the item in order to present a security risk
3. IPX3
Shielded from spraying water
Specs:
The enclosure is uncovered to water spray from the oscillated tube with every spray jet provide a flow rate of .07 l/min, for ten minutes. Alternative, a standardized spray nozzle, creating a spray of 10 l/min can be utilized. If the spray nozzle can be used, the uncovered time is 1 min/m² having a minimum duration of of 5 minutes Regardless to the kind of test equipment, water spraying is restricted to ± 60° in the Acceptance for sophistication IP X3 requires no water to possess penetrate the product inside a quantity, or in this position regarding prevent acceptable operation from the item in order to present a security risk.
4. IPX4
Shielded from splashing water
Specs:
The enclosures uncovered to water spray from your oscillated tube with every spray nozzle provide a flow rate of .07 l/min, for ten minutes Alternative, a standardized spray nozzle, creating a spray of 10 l/min can be utilized for that spray nozzle can be used within the exposure time is 1 min/m², having a minimum duration of five minute for water is splashed from the enclosure all the directions. Acceptance for sophistication IP X4 requires no water to possess penetrate in to the item in this quantity, or in this positions to avoid acceptable operation from the item in order to present a security risk.
5. IPX5
Shielded from water jets
Specs:
The enclosure is exposed to some jet water from the nozzle 6,3 mm internal diameter far away of two,5 to three m in the EUT under testing. Water flow rate 12,5 l/min is used for duration of 1 min/m² having a minimum test time period of 3 minutes. Acceptance for sophistication IP X5 requires no water to possess penetrate in to the item in this quantity or in this position regarding prevent acceptable operation from the item in order to present a security risk.
6. IPX6
Shielded from effective water jets
Specs:
The enclosure is exposed to some jet water from the nozzle of 12,5 mm diameter far away of two,5 to three m in the EUT under test. Water flow rates are 100 l/min applied for some time of just one min/m², having a minimum of 3 minutes. Acceptance for sophistication IP X6 requires no water to possess penetrate in to the item in this quantity or in this position regarding prevent acceptable operation from the item in order to present a security risk.
7. IPX7
Temporary immersion within the water
Specs:
The exam is created by complete immersion from the EUT in water in the service position.The enclosure is immersed towards the depth of just one meter using the duration duration of half an hour. Acceptance for sophistication IP X7 requires no water to possess penetrate in to the item in this quantity, or perhaps in such position to avoid acceptable operation from the item in order to present a security risk
8. IPX8
Continuous immersion in water
Specs:
The exam is created by complete immersing the EUT in water.
Test the weather is susceptible to agreement between the organization the and user. Acceptance for that Class IP X8 requires no water to possess penetrate in to the item inside a quantity or in this position to avoid acceptable operation from the item in order to present a security risk.
For those who have any query regarding IP Testing and Certification. You are able to drop your testing needs using the product technical details
We’re awaiting your earliest reply.You are able to Call or Mail us to learn more.
Resourse: https://itcindia.org/ip-testing-laboratory-india/
